| 1998-2001
Acura Integra (TypeR/Type-R/Type R)
ACURA
INTEGRA 98-01 (TypeR/Type-R/Type R) - LOWER CUSTOM MESH GRILLE/GRILL
INSTALLATION GUIDES/INSTRUCTIONS
PART#ACU-2211 |
Step
# 1
Acura Integra Type R Sport grille kit
Part# ACU-2211 available in silver, black or white this kit is designed to
fit with the factory lower lip spoiler. |
Step
# 2 Our project Tye R in need of a GrillCraft Sport Grille.
|
Step
# 3 Start by removing the screws along the top of the bumper
cover retainer. |
Step
# 4 Remove bumper cover retainer as shown. |
Step
# 5 Using a socket wrench remove the bolts on the right &
left inner corners. |
Step
# 6 Remove the the side screws that hold the lower lip spoiler in
place. |
Step
# 7 Remove the bolts on the front under side of the bumper cover.
|
Step
# 8 Remove the signal lamp screw and pop signal lamp out.
|
Step
# 9 In
the right & left fender well fin the screws behind the splash panel.
|
Step
# 10 Remove screw behind splash panel. |
Step
# 11 The bumper cover can now be removed from the vehicle.
|
Step
# 12 Place the GrillCraft grille into the opening from the front
side as shown. |
Step
# 13 While holding grille firmly in place mark the mounting tab
center hole location using a sharp scribe. |
Step
# 14 drill 3/16 hole for the rt/lft mounting screws |
Step
# 15 Drill center mounting screw hole 1 inch from the verticle
center bar as shown. |
Step
# 16 Note: center hole 1 inch in front of the vertical center
support. |
Step
# 17 From the bottom side of the bumper drill a clearance hole for
the screwdriver in order to tighten center screw from the bottom.
|
Step
# 18 Fasten center screw using the clearance hole from the bottom
side. |
Step
# 19 Fasten Right & Left side screws. |
Step
# 20 What a difference fits like a glove. |
Step
# 21 Looks factory!! |
Step
# 22 Great styling and front end protection! |
 |
|